Skip to content

Improvements, more intelligent, Wei to NIO OS 2.5.0 version officially released

little friends Hello, everyone, I am a Daewoo car vision. At February 20, Wei to be pushed to the current version 2.3.0 and above ES6 and ES8 by FOTA. For the provinces affected more serious epidemic, in principle, will temporarily Wei to push until the epidemic has significantly improved; while other provinces less affected by the epidemic, will be released in small quantities mainly in the early push. Follow my words, take a look at it ~

1. The new battery intelligent preheat switch

because lithium own characteristics, low temperature performance in winter will affect the battery power, thereby affecting the vehicle acceleration and mileage and the like. In order to minimize the impact of low temperature, Wei to design intelligent battery preheat function. In previous versions, as long as the remote open air, in conformity with the conditions set vehicle system will automatically open the battery intelligent preheating, for an extra portion of power consumption.

In version 2.5.0, Wei to increase the preheat independent intelligent battery switching function. By the “NIO App- car – air conditioning – intelligent battery warm Settings” page to open / close the battery intelligent preheating, decide whether to require air conditioning is turned on remotely, open the battery synchronize intelligent preheat function.

2. The new car photo sharing

Previously, NOMI photographs can only be exported through the U disk, but this update adds the interior upload photos to the cloud features to further facilitate sharing. Just go to the control panel – after album, select the photos you want to upload (not yet support video), click on “Edit – Transfer – Transferring to Wei to App”, you can upload photos to the vehicle computer currently logged Wei next to the account.

After the photos have been uploaded, you can enter the NIO App car pageFace, click on the small gear upper right corner, select an album on the cloud can view and manage the photos they upload.

3.NIO Pilot automatic driver assistance portion

3.1 Add automatic emergency braking – identified with pedestrian and bicycle

in front of the oncoming vehicle, the same basic automatic emergency braking (AEB) on this new recognition for the in situ for pedestrians and bicycles. When the vehicle is traveling in a forward / h speed range 8-85km, to detect a pedestrian or a bicycle in front of / and the rider can not avoid a collision occurs, the system will issue a warning to the driver and emergency brake is applied to the active attempt to reduce running speed (up to reduce the current vehicle speed 40km / h), thereby reducing the impact force of rear-end collision as much as possible.

need to be reminded to note that automatic emergency braking function, there are strict working conditions can not be guaranteed in all circumstances under the vehicle can be detected, riding or walking; for security reasons, you must not deliberately take the initiative towards the vehicle, a pedestrian or a person riding test. So, this feature must suggest that you carefully review the lorry updated user manual, automatic emergency braking function and understand the application scenario. In addition, although AEB can identify pedestrians and bike / ride, but ACC / Pilot feature is still only as to follow the target vehicle, please do not misinterpret the scope of application of AEB, be sure to pay attention to driving safety.

3.2 Add overtaking aid

Now, the use of self-ACC pilot cruising or adaptation functions (turn signal control lane change ALC function to be closed) follow the leading vehicle, if the current vehicle speed 50km / h and not greater than the vehicle speed exceeds the set cruising, such as playing the left turn signal driver turns the steering wheel to the left and tried to pass the vehicle in front, the system will immediately combine the vehicle in front and the target lane situation properly adjust the speed of the vehicle (but no more than the current setCruise vehicle speed), to assist the driver to change lanes to overtake.

also need to remind you, as an auxiliary function overtaking driver assistance, aid can only adjust the speed of travel, can not control the direction of travel, we must always manually control the direction and take the initiative before overtaking and overtaking process visual inspection to confirm the security environment surrounding overtaking, be ready to take over the vehicle. Truck suggest that you carefully review the updated user’s manual and understand overtaking accessibility before attempting to use.

4. The dynamic instrumentation interface optimization

new version, Wei to the many optimized for dynamic instrumentation interface to better help people grasp the state of the vehicle and the surrounding environment, and improve technological sense and practicality displayed by the instrument, including:
the in-meter driving perspective dynamically adjusted according to changes in the traveling speed;
the instrument can support up to three lanes left, right, complete display;
optimization Pilot open animation display;
optimization lane line from the display and visual effects, and the overall effect is more realistic;
Add the vehicle model matching ES6 display;
Add matched according to the actual appearance of the color of the vehicle color model vehicle;
new model vehicle distance display light is turned on;
Add the obstacle around the vehicle model and the distance detection display.

Other automatic driver assistance Optimization:

[123 ] in addition to these important new features and optimization, also the NIO Pilot Wei to overall capacity is optimized, including:

Pilot target optimization and recognition of lane line;
Pilot optimize the performance of, Pilot increase the coverage of the application scenario;
Pilot optimize comfort braking at low speed; in
Pilot case turned on and the steering assist function is activated, if the adjacent lane when the vehicle approaches the vehicle lane, Pilot function It may make the vehicle deviates from the lane center in the vehicle traveling slightly to make evasive action; the case of
turn signal lane change control (ALC) channel does not meet the varying conditions of the vehicle will remain within 10 secondsContinued monitoring of the lane change condition is satisfied (until 5 seconds).

5. The digital cockpit section

5.1 new intelligent scene recommendation (contextual component)

2.5.0 version, we have added smart scene function is recommended. The vehicle will be based on different usage scenarios, giving more clear feedback on the results of the voice command has been entered at the same time, while having the flexibility to intelligently operate more recommendations related functions.

For example, by opening the main drive NOMI seat heating, the heating of the vehicle seat main drive command executed at the same time, it will also bring up the heated front seats and heated steering wheel adjustment interface in the control screen. Only easily click on the icon in the interface can continue to adjust the heating gear, or open the front passenger seat heating, feedback clear, simple and quick.

5.2 new increase in electricity assistant

Now, if we have self-fill can while driving demand, you can find powered by the new resources within the vicinity of the central control panel is powered assistant. In the unused state vehicle navigation route planning, click on the bottom left of the map interface small “powered Assistant” icon, the system will automatically show nearby charging resources and intelligent recommendations based on the actual situation, marked by different colors and icons:

blue: NIO self-powered resources currently available, and the vehicle mileage can support existing drivers arrive in normal circumstances;
red: third-party power-resources currently available, and the life of existing vehicles mileage can support the driver reach under normal circumstances;
gray: the power-resources are currently unavailable or vehicle mileage can not support the existing drive to reach under normal circumstances.

you can click on the “Filter” button, further according to operators, power resource type, power characteristics of resources, etc. screening of resources; in addition, by clicking on the icon to any charge resources can enter the details page, checkLook charging power, opening hours, prices and other information charge, initiate and support direct navigation.

6.NOMI experience optimization

6.1 ES6 new NOMI ONE-SHOT (a language that is up) switch

on the ES6, NOMI support a language that is up (that is to say even wake up words and commands, such as “Hey NOMI help me open the window”). Due to a language that is up to the required function, the wake-up NOMI it will not reply “in it”, but only “drip beep” sound. But many users say still want to have a dialogue with NOMI feeling. So we – Added a language that is up to the function of switches “in the control panel settings -NOMI” menu. After

upgrade is complete, the switch is turned off by default, NOMI will reply “in it.” If you still prefer the simple style before, or even like saying the word input mode and wake-up command, “NOMI ONE-SHOT” switch can be opened.

6.2-vehicle operating ask NOMI (ES6)

Now, ES6 also support the same car and ES8 operation asked NOMI function. If you do not understand some of the features ES6, but also read the user manual feel too much trouble, you can ask directly NOMI get help (Example: “? NOMI Hey, how adjustable seats”). NOMI will be brief and to help find the relevant functions in the user manual position. Just click on the large-screen display of the “User Manual” button to introduce direct correlation function interface.

6.3 Add NOMI Halo Ambilight luminous efficiency

is selected to Wei NOMI Halo the user adds more brilliant Ambilight light effects. When playing the media, the color of the surrounding Halo Halo flow occurs, as we bring more pleasure. However, under the “Do not disturb” and “silent mode” to play mediaAmbilight light efficiency thereof does not occur.

6.4 NOMI ability to enhance speech vehicle control

In addition to the first few outside the function, we also NOMI’s ability to control the car has been upgraded. Now, NOMI can support handover fragrance, adjust the concentration of fragrance, turn on / off the navigation voice broadcast, on / off HUD, HUD regulation height / brightness, query a variety of operating air conditioning state, and further to provide a more convenient vehicle for everyone to experience .

Other major experience optimization update:

1 personalized driving mode hundred kilometers in 4.4 seconds (ES8) /4.7 seconds (ES6) mode can now be the brake energy recovery level set to “standard”;.

2:00 wake vehicle, the air conditioner oN state / outer loop will be a state where the vehicle consistent with the sleep;

3. support add a shortcut key recording function control menu. When during driving in case of recording the desired scene, may be opened by controlling the shortcut menu long driving recorder and recorded video up to 60 seconds, and stored in the album – emergency video folder (not covered cycle); [ . 123]

4 NOMI fix some scenarios only by steering wheel buttons wake-up, and does not recognize the voice command;

5 fix some scenarios not unlocked by control of the shortcut menu security. problems tank;

6 optimize navigation performance, fixes the navigation route calculation is repeated and can not be updated in some scenarios the yaw directions, the navigation problem stuck;..

7 fixes under certain scenarios voice broadcast speed and instrument display inconsistencies.

These are the NIO OS 2.5.0 version update of the main highlights and a brief introduction, the future we will actually go experience updated content, as we bring more experience and detailed description.

Leave a Reply

Your email address will not be published. Required fields are marked *

Exit mobile version