[ Juxun Wang reported ] Yantai, a seventh-generation Accord riders Advisory: cold fast idle slow down, 1500–800 need to place more than five minutes after the start pause that is needed to go more than two kilometers fuel 15+, 10+ long. 0-30 of Mobil oil change, change of front has a male (front oxygen sensor should be), thermostat, spark plugs, coolant temperature sensor, an air valve, carbon canister solenoid valve, showed no effect.
after consultation, Yantai riders who took over this seven generations Accord production date of 2005, age of the vehicle for 15 years, with mileage over 160,000 km, row gas is 2.4L, automatic models, vehicles should keep drawing the same. Description According to the owner, the car there VTEC valve leakage problems.
query through the network, version 2005 Accord 2.4L Euro III emission standards, the multi-point electronic injection fuel supply means, the transmission of 5AT, front suspension is double wishbone independent suspension type rear suspension is multi-link independent suspension, using a mechanical hydraulic power, the wheel specification is 205 / 65R15. Knowing basic vehicle information, let us look at the contents of the Yantai riders narrative.
1, 15 + daily driving, traffic congestion in the capital if, considering factors such as vehicle age and mileage, the fuel consumption is actually not really very much;
[ 123] 2, cold slow down high idle, 1500 rpm down to 800 rpm for 5 minutes or more is required, i.e., after the pause start driving when required more than 2 kilometers;
3, 10+ long, the understanding, which commuting commuter mileage riders on the site about 70 kilometers, high travel speed limit 90-100km / h, one-way about 30 minutes, 5 km from the city traffic, the rest are fast road;
4,0W-30 oil viscosity appropriate, additional vehicle before replacement oxygen sensor, thermostat, temperature sensor, coolant, spark plugs, air valve, the canister solenoid valve, not effective;
5, owners Yantai, Shandong, If there are local Honda service experts are welcome to contact.
View vehicle maintenance history, maintenance has been considered a cooling system, such as replacement of the cooling liquid, thermostat, temperature sensor, vehicle-speed uniform over time consultation with warm air hot enough, indicating that the size of the engine cycle performance line It should be normal.
When the engine cooling system is always in a cycle state, most vehicles with high speed uniform temperature decreases, resulting in deterioration of the effect of the warm air. There is also considered part of the electronic control system, for example air valve (provisional intake air induction aspect), before the oxygen sensor, the canister solenoid valve, the spark plug and the like.
based on vehicle maintenance history, I suggest the following:
1, vehicle inspection basis, first to confirm the existence of Baolun wheel brake systems, this is based on 15 years of age of the vehicle, 160,000 km to consider, if a poor return wheel, the brake will result in increased running resistance;
2, automatic transmission inspection to confirm whether the slip case. Description According to the owner, the vehicle speed range shifting turn around in 2000, a bit of the high speed range, is also recommended test, to confirm whether the vehicle is in powertrain performance fault is present;
3, the throttle valve completely washable , inside and outside clean. According to the owner narrative, also is planning a system to clean, pick a search on the search to the following figure, is possible that the problem is more common, maintenance should also be considered;
4 can be considered thoroughly cleaning nozzle, an intake manifold dismantling, cleaning, if necessary, and replace the relevant seals to ensure tightness intake;
5, recommended local find a practical point repair shop, a comprehensive inspection, to develop a reasonable maintenance program, this vehicle age and mileage of the vehicle, there is no need to put too much;
6, concerned about their vehicle double-wishbone front suspension, because the 8-generation model part of the front section before using double wishbone suspension, the case too embodiment knuckle ball before extrusion occurs the front suspension.
As shown above, a large art God of Jubilee Bowen that: at full load lifetime control arm ball joint ball facing the steering wheel abruptly pulled off from the bowl deadly dangerrisk.
Example I also had witnessed models off-axis with 8 generation was better in congested city traffic, the vehicle speed is not high, it does not lead to a serious accident , I figure that is really making.
above include several instances, you only riders to be a reference.
Tips: riders have purchased such models, be sure to always check the vehicle front suspension knuckle under the ball, should be promptly disposed of when Songkuang appears, to avoid danger in traffic ;
intend to buy a used car models that generations of riders, we not change the intent models, look at other models of the brand.
Finally, also welcomed the Honda Yantai Zhaoyuan large area repairs take, if you can be contacted at lower cost to solve the existing problem of the car, eliminate the problems encountered in Yantai riders are welcome.
Note: The text with pictures from the network, if the violation of your rights please contact deleted. One of the words, welcome to the great God treatise industry to benefit more riders with models for future reference car to keep a car.