Skip to content

What is the oil and gas separator?

An apparatus for the

oil separator, the oil is produced crude oil and associated gas are separated. Oil separator submersible centrifugal pump disposed between the protector and the well fluid in the well with the free gas separated from the liquid, the liquid to the submersible pump, gas is released into the tubing and casing annulus.

1. The oil separator Category

Sometimes also as a multiphase separator separating water and oil sand, etc., buffers, metering purposes. From the shape generally divided in three forms, vertical, horizontal, spherical. The container comprising four parts: (1) separating the inlet means substantially separating oil and gas, such as oil thrower groove, sieve and the like; (2) to capture oil droplets umbrella or mesh mist from the gas; and (3) from the liquid separating the gas baffle; liquid-sealed state (4) with a float valve controlling the oil pressure on the level controller and control valve of the exhaust pipe, and the liquid outlet in order to maintain a predetermined pressure separator. 1- hydrocarbon inlet; 2- outlet; 3- outfall; 4,5 Importers heating coil; 6- outlet valve; 7- mist trap; 8- baffle; buoy 9-
1 – oil and Gas inlet; 2- dispensing head; 3- mist trap; 4- trachea; 5-Baffles; 6- outlet valve; 7- buoy; 8- base; 9- outfall

effect the oil separator 2

Oil separators whole submersible pump system one important part of its role as an oil and gas into the first multistage centrifugal pump suction port; before aeration followed by liquid entering the multistage centrifugal pump, the free gas separated from the well fluid through the separator, thereby reducing Effect of the operating characteristics of the gas on the submersible pump, the centrifugal pump cavitation prevention, gas locks the multistage centrifugal pump is working. .

Replacing the oil separator 3

1-in models:
1 compressor shut down, closed pneumatic outlet drain valve open, the validation system without pressure.
2. The line above the barrel and gas disassembled, while maintaining the pressure to the valve outlet conduit of the condenser was removed.
3. Remove return pipe.
4 fixed on the bolt cover removed oil barrel, the barrel cover removed gas barrels.
Remove the oil separator 5 put the new oil separator.
6. disassembled by reverse order installed. .
External type 2:
stop the compressor, compressed air outlet closed, vent valve is opened, the system will confirm that no pressure vapor separator removed old replacement of the oil separator can be.

Leave a Reply

Your email address will not be published. Required fields are marked *

Exit mobile version