surrounding the automobile body external spoilers also known, from racing. Reducing the reverse flow produced cars, while increasing the pressure of the automobile, making the car more stable at high speeds, thereby reducing fuel consumption. The reference to the siege of the civilian vehicle valued not so functional, more emphasis is beautiful appearance of coordination and personalization. In today’s increasingly seeking personality, appearance change range, easy to install, gradually became surrounded by large owners preferred products.
1. Surrounded Category
First, two main types of mounting style
1. The installation section
it does not require change the original car, only half of the installation of the lower lip on the original bumper. Surrounded by large installed technology not ask for much. As a result of 3M Glue and fastener installation, if you want to remove the siege again easily. 2. bumper section
can dramatically change the appearance, more personalized, but will need to remove the entire original front and rear bars, and then loaded on another bumper.
II.Divided according to their material
1. The glass fiber material
The most common, style select multiple, less expensive, but poor toughness by weight, if the attrition occurs easily broken.
2.ABS plastic
It is vacuum molded plastic, thin, it can not be surrounded by such a material section of the bumper, only surrounded by large production section of the lip.
3. Synthesis of a resin material
less shrinkage, heat distortion, good toughness, so create a smooth surface of the product, the price is relatively high.
4. The polyester plastic
is the result of a high pressure injection molding, a high flexibility and strength. Because most of the original car bumper is manufactured using polyester plastic, the same material so the adaptation of the body is also the best, and longer life, higher prices.
2. The installation surrounded Notes
1. The installation should be used in high-quality products, surrounded by large installed in the car, also with the car as a whole, the daily bump in the inevitable, if the material surrounding the fragile, too rigid, it is easy to fragmentation, would not only increase the cost of replacement, but also added a lot of trouble.
2. The best not to use a large need to tear down the original car bumper surround to install, because the material used is better surrounded by large shock survivability original car bumpers, so large selection of the original bar wrapped therein surrounding the vehicle does not affect the robustness, but if we must choose surrounded split bars, bars in the original buffer can be transplanted into a large packageWai in order to play a protective role.
3. The installation of the siege should go to an experienced shop to retrofit, because they have converted shop surrounded by large production and maintenance of various capabilities, the Metropolitan repair free of charge for owners surrounded accidentally break something, so quality protection.