Skip to content

What is the security configuration copilot airbags?

1

what’s the use?

event of a collision airbag deployment, the main co-pilot to protect the occupant’s head and body, interior trim, etc. to prevent direct impact to reduce the degree of occupant injury.

2

Did you know?

* for the vehicle pilot position of the airbag not to allow the child sitting in front of this position or placement of the child seat, the airbag unless the switch, this airbag manual close position, otherwise it will cause great harm to the child when the balloon exploded.

· Some owners like to put on a plaque in front of the co-pilot position decorative items, not only affects the driver’s line of sight, but also may prevent the air bag or inflatable balloon projectile out, resulting in greater danger.

· seat belts and air bags is a complete security system, it can be said airbags are secondary seat belt, so buckle up is a prerequisite.

· on and hit the balloon can not be foolproof, nor is it comfortable and soft feeling. It will still be the case even more serious injuries occur.

· Not every collision occurred balloon will pop up. Collision does not touch the air bag sensing points, or reach the standard value when the air bag is turned on, the balloon will not pop up.

The airbag lights lit on the instrument · representation airbags may fail, you will need to carry out checks and maintenance.

3

Technology Principle

The airbag consists of three parts: an airbag inflation system and a sensor. When the sensor detects a vehicle collision, the inflator system can be quickly inflated in less than a tenth of a second time, or to produce harmless nitrogen gas balloon filled with compressed nitrogen release, the airbag when inflated out of the steering wheel or dashboard. So that the occupants from the forward collision impact force generated about one second later, the balloon will shrink (there are holes in the balloon deflated), it will not impede the action of the occupants.

Leave a Reply

Your email address will not be published. Required fields are marked *