Groups take part
is wipers wiper strip, steel wipers, wiper sheath, plastic parts, four parts from groups ride. Compared to conventional wipers installed the ride, boneless wipers set to take very simple and convenient; just workers assembled by hand without the need of a screwdriver.
ordinary wipers rely on the skeleton to the blade and the glass fit, because of its structure, it is impossible to make the blade and the glass perfect fit, resulting in no net scratch, smear easy to wear, noise and other issues. Wipers are turned on over a whole bar to spread the pressure force, so that the force of the blade portions of a uniform, water marks can be reduced, resulting in scratches, achieve better wiping effect. Furthermore, jitter can greatly reduce wear, combined with a uniform force, anti-sun, simple in structure, lighter weight, etc., the wiper motor and blade life extended by at least twice the conventional wiper, more economical and reliable.
1 Characteristics
1, wipers and curved glass tightly bonded, uniform force, blade coating scraped pay carbon ensure quieter, smoother, cleaner .
2, using aerodynamic designs, in high-speed driving, the blade will not be lifted airflow ensure wiping clearer.
3, wiper design optimization, the intermediate flat strip width, having a shading anti-aging effect.
4, using a floating steel skeleton structure, to eliminate shaking motion. Long life, light weight, strong adhesion than conventional wipers.
5, and rubber spring cover sheet, it is made strong resistance to ozone and UV resistance rubber, adapted to different climatic conditions.
6, compared wipers, wipers group ride more simple and convenient, only be installed manually, without using other tools.
one difference: the structure
no bone wipers, Wiper bone. Modern wipers combine the benefits of traditional bone and boneless, and the production of a boneless wipers can also say with bone steel structure.
two differences: on the work
A plurality of pressure points conventional wipers, integrated steel without use of wipers, uniform stress points.
three differences: mounting
When replacing the wipers on the vehicle, need to replace the wiper arm; and replacement of wipers, the wipers need replacement, together with the wiper arm.
four differences: Effect on
wipers aerodynamic principles of design, when high-speed driving, the blade will not be lifted airflow ensure wiping clearer.
2, a standard size and material
1, wipers steel materials and various parameters of the standard
of steel: carbon steel SK-5
Hardness: HV- 460 to 480
length: 10quot; -28quot;
– thickness of 0.90 mm
width 0.80mm: 7.00mm 14.00mm
2, wipers scaffold materials and various parameters of the standard ~ [123 ] steel: 430 stainless steel / carbon steel
length: custom
width X thickness:
3.00mm (thickness) x 9.00mm (width)
3.50mm (thickness) x 9.00mm (width )
4.00mm (thickness) x 9.00mm (W)
2.60mm (thickness) x 9.00mm (W)
wiper unit conversion table 14 ’16’ 16 ’20’ 21 ’22’ 24 ‘ 26 ’28’ 350mm 400mm 450mm 500mm 525mm 550mm 600mm 650mm 700mm (unit conversion = 2.58 cm –1 feet / 0.4 = 1 cmInch)
3, the installation method
1, standard interface design, easy to install, without having to replace the wiper arm, direct replacement.
2 and remove the original wiper, the wiper wear.
3, if there is oil, wax, dirt and other foreign matter on the windshield, a clean process after the first use.
4, use and maintenance guidelines
● wiper sunny day when used to remove dust from the surface of the windshield, the glass must be sprayed with water, not dry wiping.
● other stubborn dirt on hard glass should be clean by hand. These things are easy to make the wiper blade injuries, leading wiper scraping is not clean. The worst case, the wiper motor will also be affected.
● daily washing and cleaning Wiper films to be lifted, to take enforcement wiper blade, “back”, back when gently put, it will not be popping the wiper blade bounce.
● Winter, you should use an ice scraper to clean the surface of the windshield ice ballast, so as not to increase the burden of the wiper.
5, frequently asked questions
slightly at both ends
At present most of the original sales model is not equipped with wipers, and only later with the rain turn from bone boneless wipers. But about 5 percentage will vary models radian glass wiper two sizes cause slight tilt of the glass and not stick. This is because the difference between the pressure in the system and there is no bone caused by bone. Encountered a similar situation do not worry, will not affect the normal use of effects in most cases, but will reduce the wipers area and only distributed at both ends, so the driver’s side and will not have a serious impact. To eliminate this situation, it is possible to reduce the size of the wiper inch at the time of purchase, you can solve the basic two slightly warpedSince the problem. Another reason is the pressure of the wiper arm spring is too large. This time to be observed between the central strip of the wiper and the glass will deform, if there is, it is necessary to adjust the spring pressure of the wiper arm or wiper arm spring replacement problem can be solved. Not properly fit the windshield
wipers middle part of the arch is due to lack of pressure caused by the rocker arm wipers, the ultimate solution to this problem only to the 4S shop to replace the rocker bottom of the spring, the pressure was returned to normal, but there is a part of China-made cars congenital deficiency pressure, but there are some car because life is too long and cause the spring caused by aging. Beat phenomenon
This situation may have three reasons, 1, the windshield is not clean. Glass can be thoroughly cleaned with water and detergent specialized glass, invisible attachments and surface oil removal and the like; 2, jitter occurs immediately after a new installation wiper, wiper blade rubber itself because the situation is the presence of unevenness of the cut should be replaced ; 3, the use of wipers period appear jerky. Frequent use of wipers such as dry scraping, etc. In unusual circumstances, may cause wiper strip contact surface is damaged large areas, should be promptly corrected habits. Abnormal sound
wipers Wiper blade with different percentages of the wipers 90 using a lateral cover strip of the wiper double or even multi-layered, so that a new layer of the first wipers has rainfall after all the water drained, leading to the back edge of the glass layers of dry scraping noise, in which case do not worry too much, as after a period of time the sound will disappear. But when the sound disappeared again, it’s time to replace the new wipers, because at this time is not dry scraping sound but tremble, and wiping effect than ever before.
6, wipers Selection Guide
The wipers experience using some owners to provide feedback, we recommend (wet areas such as Intra, etc.) wipers best 2- replaced every three months.
and to replace the wipers do not need to replace the 4S shop, first of all because the wipers easy to replace, the first attempt to get started, no professional skills. Secondly, because the 4S shop to replace the wipers higher price, every change must be hundreds,This is for the owners is undoubtedly a big burden, resulting in some owners do not want to periodically replace the wipers. Xiao Bian recommended that owners can choose online shopping wipers or to some sites that offer free access to the wiper wipers, such as Xiao Bian own use wiper that is free wipers, is a company called “road Orchestra” site acquisition, has been used for six months of the current home of the wiper feel good.
Please note that the owners of their own size car wipers used to buy wipers, wiper length to determine the car and vehicle information. These timely information to the wipers sellers to buy the corresponding size of the wipers.
7, compared to the size of
buyers closer confirm the size of the wiper used their own cars before buying, to avoid trouble.
inch wiper control units and metric units: 14quot; – 350mm 16quot; – 400mm 18quot; – 450mm 20quot; – 500mm 21quot; – 525mm 22quot; – 550mm 24quot; – 600mm 26quot; –650mm 28quot; – 700mm